MIL-PRF-83536B

作者:标准资料网 时间:2024-05-09 23:18:47   浏览:9763   来源:标准资料网
下载地址: 点击此处下载
MIL-PRF-83536B, PERFORMANCE SPECIFICATION, RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, 25 AMPERES AND BELOW, GENERAL SPECIFICATION FOR (15 APR 2003) [SUPERSEDING MIL-R-83536]., This specification covers the general requirements for electromagnetic, hermetically sealed relays for use in aircraft, missile, spacecraft, ship, and other primary vehicles or in ground support equipment (see 6.1). These relays are designed to operate over the full range from low level to power switching with contact ratings up to 25 amperes alternating current (ac) or direct current (dc). Specification sheets (see 3.1) specifying requirements for 25 ampere relays are for relays that have a maximum load rating of 25 amperes for resistive load only. All other load ratings (motor, inductive, lamp) are less than 25 amperes. The failure rate (FR) level is established at a confidence level of 90 percent for qualification and 60 percent for maintenance of qualification based on 100,000 cycles at +125?C under the rated load conditions specified herein. For application and caution information, see 6.1.
下载地址: 点击此处下载
基本信息
标准名称:透明液体颜色测定方法(加德纳色度)
英文名称:Standard test method for color of transparent liquids(Gardner Color Scale)
中标分类: 化工 >> 合成材料 >> 合成树脂、塑料基础标准与通用方法
ICS分类: 橡胶和塑料工业 >> 塑料 >> 热固性塑料
替代情况:替代GB/T 12007.1-1989
发布部门:中华人民共和国国家质量监督检验检疫总局 中国国家标准化管理委员会
发布日期:2008-08-04
实施日期:2009-04-01
首发日期:1989-12-25
作废日期:
主管部门:全国塑料标准化技术委员会(SAC/TC 15)
提出单位:中国石油和化学工业协会
归口单位:全国塑料标准化技术委员会(SAC/TC 15)
起草单位:国家合成树脂质量监督检验中心等
起草人:王永桂、王琰、毛尽艳、程振朔
出版社:中国标准出版社
出版日期:2009-04-01
页数:12页
计划单号:20065231-T-606
适用范围

本标准修改采用ASTM D1544-2004《透明液体颜色测定方法(加德纳色度)》(英文版)。
本标准代替GB/T 12007.1-1989《环氧树脂颜色测定方法 加德纳色度法》。
本标准规定了干性油、清漆、脂肪酸、聚合脂肪酸、树脂溶液等透明液体颜色的测量方法,通过与适宜的玻璃标准色号相比较,以进行颜色测定。
本标准与GB/T 12007.1-1989相比主要变化如下:
——更改了标准名称;
——增加了前言;
——颜色标准由原来的液体标准改为现在的玻璃标准;
——对试样与标准的排列放置做出了要求;
——对观察视野做出了要求。

前言

没有内容

目录

没有内容

引用标准

下列文件中的条款通过本标准的引用而成为本标准的条款。凡是注日期的引用文件,其随后所有的修改单(不包括勘误的内容)或修订版均不适用于本标准,然而,鼓励根据本标准达成协议的各方研究是否可使用这些文件的最新版本。凡是不注日期的引用文件,其最新版本适用于本标准。
ASTM D1545-1998 用起泡时间法测定透明液体黏度的试验方法。
ASTM D6166-1997(2003) 松脂制品及相关产品颜色的标准试验方法(加德纳色度法)。
ASTM E308-2006 用CIE 体系估计物体颜色的试验方法。

所属分类: 化工 合成材料 合成树脂 塑料基础标准与通用方法 橡胶和塑料工业 塑料 热固性塑料
Product Code:SAE AMS4123
Title:Aluminum Alloy, Rolled or Cold Finished Bars and Rods (7075-T651) Solution and Precipitation Heat Treated
Issuing Committee:Ams D Nonferrous Alloys Committee
Scope:This specification covers an aluminum alloy in the form of bars and rods.